Tower Design
The heavy-duty 10 gauge formed steel tower provides
ruggedness and stability. The film carriage elevator
uses maintenance-free UHMW polyethylene slides that
require no lubrication. Concealed within the tower is a
dual roller chain elevator that provides proven strength,
reliability and positive drive. The rear door of tower
accesses elevator drive and electrical control panel.
Alternate Roller-Brake (RBM)
In addition to our pre-stretch systems, the LP2020 is
also available with Roller-Brake. The Roller-Brake uses
a magnetic particle brake on a urethane roller to provide
constant tension for wrapping with stretch film, vented
film or plastic netting. An optional attachment enables banding or film roping.
The unique HI-SLIDE telescoping mast (left) enables
wrapping loads up to 130” tall. The built-in telescoping
mast eliminates field installation of extended mast
structures and allows the LP2020 to be shipped
completely assembled. Retrofit Options
Most optional features, such as
Auto-Cut and Top Compression
Platen are already programmed
into the control & become
operational when installed.
Standard Features:- Turntables are driven by non-stretch, non-jamming belt
• The table is supported by 8 lubricant free cam follower supports rated at 5,000lbs each
- Turntable powered by 3/4hp Helical DC gearmotor
- Variable speed 0-15rpm with soft start and soft stop
• 60” round turntable with 3” safety skirt
- 6,000 lb. (2700kgs) load capacity
- Lubrication free enclosed gear drive design
- Synthetic lube in all gearboxes (-30 to 120 degrees)
- Standard load diagonal = 80” (2032 mm)
With extended base = 128” (3251 mm) - Standard load height = 80” (2032 mm)
With HI-SLIDE = 120/130” (3048 mm) - Forklift portable from rear
- Up to 30” (762mm) film width
- Photo-electric load height sensor
- Micro computer control
- Cycle pause control
- Automatic & Manual belly banding
- 115 volts 50/60Hz 20 Amp service
Optional Features:- Integrated scale
- Hi-slide telescoping mast for tall loads
- Auto-cut film at end of cycle
- Oversized turntables 65" and 72"
- Split or extended base
- Dual turntable
- Top compression platen for unstable loads
- Heater option for PLC operation in cold weather
Recommended use 32°F and below
|
